HARK-MUSIC Installation Instructions

OS
- Ubuntu 10.04 lucid (both 32bit and 64bit)
- Ubuntu 12.04 precise (both 32bit and 64bit)

For other environments, please go for the source compilation.
The pre-compiled binaries for lucid are supported up to HARK version 1.1.0.
To use HARK later than version 1.1.0 in lucid, go for the source compilation.

Installation

Setup your sources.list file to accept Debian packages from the HARK server.

Ubuntu 10.04 (Lucid)

sudo sh -c 'echo "deb http://winnie.kuis.kyoto-u.ac.jp/HARK/harkrepos lucid non-free\ndeb-src http://winnie.kuis.kyoto-u.ac.jp/HARK/harkrepos lucid non-free" > /etc/apt/sources.list.d/hark.list'

Ubuntu 12.04 (Precise)

sudo sh -c 'echo "deb http://winnie.kuis.kyoto-u.ac.jp/HARK/harkrepos precise non-free\ndeb-src http://winnie.kuis.kyoto-u.ac.jp/HARK/harkrepos precise non-free" > /etc/apt/sources.list.d/hark.list'

Set up your keys.

wget http://winnie.kuis.kyoto-u.ac.jp/HARK/harkrepos/public.gpg -O - | sudo apt-key add -

HARK server re-indexing

sudo apt-get update

HARK stack (harkfd, hark-music) installation

sudo apt-get install harkfd hark-music

Installation from source compilation (Optional)

Step1 : HARK Basic Package Installation

Here, the source compilation of only hark-music package is explained.
We assume that the HARK basic packages (such as harkfd, flowdesigner-0.9.1-hark) are installed by pre-compiled bineries.

sudo apt-get install harkfd

hark-music package is installed by source compilation in the next subsection.

Step2 : hark-music Package Installation

To install hark-music, we need source codes of both hark-music and harkfd.

Firstly, move to your preferred directory to download source codes.

mkdir ${HOME}/YOUR_HARK_DOWNLOAD_DIR
cd ${HOME}/YOUR_HARK_DOWNLOAD_DIR

Download source codes from hark-fd-*.*.*.tar.gz and hark-music-*.*.*.tar.gz and unzip them.

tar zxvf hark-fd-*.*.*.tar.gz
tar zxvf hark-music-*.*.*.tar.gz

Compile and install the source codes.

cd hark-music-*.*.*
./configure --prefix=/usr --with-hark-inc=${HOME}/YOUR_HARK_DOWNLOAD_DIR/harkfd-*.*.*/include/; make clean; make ; sudo make install;

The "*.*.*" describes the package version.

Here, we need header files of harkfd with --with-hark-inc option, so we downloaded harkfd source files.

Check the installation

To check the HARK-MUSIC installation, follow this section.

Run Flowdesigner in a new terminal.

flowdesigner

You will see something like following.

UINodeRepository::Scan()
Scanning def /usr/lib/flowdesigner/toolbox
done loading def files

If you see some HARK-MUSIC related errors here, some packages haven't been correctly installed.
Then, repeat the installation above.

HARK-MUSIC modules can be found at the following place.

Right click > New Node > HARK > MUSIC

HARK-MUSIC Installation Instructions